---------Electric Heater Element Advantages
1.Energy efficient
2.Broad variety of sizes for different applications
3.Compact
4.Moisture and contaminant resistant
5.Easy to instant
6.Easy to maintain
7.Designed and built for safety
Flange immersion heaters are one of the most widely used methods for heating gases and liquids (such as water, oil heat transfer fluid and corrosion solution). Designed for use in tanks and pressurized containers, they are easy to install and maintain to provide heat for many process. The direct immersion method is energy efficient and easily monitored and controlled.
Specification parameter | Detail | Remark |
Name | Electric heating element | |
Insulation resistance | ≥1000MΩ(cold condition) | |
Leak current | ≤0.5mA | |
Material | Copper T2 | Materials can be changed to be copper,sus321,sus316L,incoloy804,incoloy800 as requested |
Voltage/wattage | 220V/1500W | Voltage/Wattage can be customized as required,and Wattage tolerance(cold condition):+5%-10% |
Diameter | 8-8.5mm | Tube diameter can be changed to 6.6mm,8.0mm,10.0mm or others as requested |
Resistance powder | Magnesium oxide | We can use other powder if requested |
Faston terminal | Nickel plated iron | Materials of terminal housing could be stainless iron,stainless steel if required |
Leads | Stainless steel | Materials of terminal piece could be stainless iron,stainless steel if required |
Thermal fuse | Iron chromium | Material of thermal fuse can be nickel chromium wire if requested |
Application | Roaster,bread toaster,stove,furnace,water boiler,and other home appliances |
-----------the application of the electric heating tube
with the protection of the outer metal shell,Electric heat pipe is used for heating many objects, such as air, metal molds and liquid. Electric heating tube also can be used in industry such as tank, oil tank, acid and alkali tank, the fusible metal melting furnace, air heating furnace, drying furnace, drying oven, hot pressing molding device, etc.
--------The introduction of Flange Typed Heating Elements:
Flange Type of Electric heat tube is welded by several heating tube on the flange , and they will heat centrally, Mainly used in open and closed heating solution tank and circulation system. It has the following advantages: the surface power is big, make air heating surface load of 2 ~ 4 times.
Flange type electric heating tube is intensive and compact structure. Due to the short length and intensive, therefore, it has good stability, and it can be installed without bracket. Combined elements mostly adopts argon arc welding way which makes the flange connected to the element tube, it can also can use the form of a fastening device. It means that every piece of electric heat pipe welding on a fastener, Then the flange cover will be locked by nuts. Pipe is welded to fastener by argon arc , it will never leak. Fasteners seal uses the scientific process. The replacement of single piece is extremely convenient, which greatly save the maintenance cost. We select imported and domestic high-quality materials, also use scientific production technology and strict quality management, so we can guarantee the electric heating pipe superior electrical properties.
-
------When you order, pls advise when inquiry:
(1). Material
(2). Wattage and Voltage
(3). Diamensiom of the tube and APPROX length of the heating tube
(4). Drawing required for special configuration
(5).Trial or Sample order is also welcome.
------We guarantee:
(1) every piece of product is under strict test before dispatching
(2) higher quality than normal market products
